Initialization And Entry; Initialization Sequence; Entry Sequence - Honeywell Excel 50 User Manual

Hide thumbs Also See for Excel 50:

Table of Contents

EXCEL 50 MMI - USER GUIDE

INITIALIZATION AND ENTRY

Fig. 3. Initialization and entry sequences

Upon downloading an application into your Excel 50 MMI (see also "Powering Up

/ Resetting the Controller" on page 47), the initialization sequence will begin. This

initialization sequence consists of a series of four screens (see Fig. 3). If the

configuration codes are correct, the initialization sequence should be immediately

followed by the entry sequence (see section "Entry Sequence" on page 5).

After the application has been downloaded, the entry sequence will begin. The

first screen is the start screen (see Fig. 4).

Fig. 4. The start screen

The start screen includes the name of the application (in this case, HE01) as well

as the current date and time.

If "BW-MMI" appears, this means that the controller offers C-bus access (which

you would need to communicate with modules located on a C-bus). See section

"C-Bus Configuration" on page 35 for more information.

EN2B-0222GE51 R0216

Table of Contents

Show Quick Links

Table of Contents