11.3
Gearbox (FC 75)
•
Lock output shaft with pin,
dia. 5 mm.
•
Unscrew collar nut in the direc-
tion of the arrow (left-hand
thread).
1
2
•
Remove outer thrust plate (1)
and blade (2).
•
Remove inner thrust plate.
48
3
2
•
Unscrew clamping screw (1) and
knurled screw (2).
•
Remove clamping element (3).
•
Pull deflector off gearbox.
Note: The following three actions
are required to replace the deflec-
tor.
3
1 2
1
•
Remove screws (1) on holder (2).
•
Pull knurled screw (3) out and
remove washer (4).
1
•
Unscrew bearing bolt.
- Remove wheel.
•
Remove screw (1).
•
Remove rubber guard (2).
4
•
Undo clamping screw.
- Pull gearbox off protective tube.
1
2