Stihl FS 75 User Manual page 10

•
Unscrew clutch from crankshaft
stub, turning it in the direction of
the arrow.
- Disassemble and reassemble
clutch, see manual "Trouble-
shooting, standard repairs".
10
3.2 Installation
•
Screw clutch onto crankshaft
with the smaller hexagon facing
outwards and torque down to
21 Nm.
•
Ensure that inlays are present in
fan housing; insert them if
necessary.
2 2
1 1
2 2
•
Position motor on fan housing,
ensuring that stubs (1) engage in
inlays (2).
- Insert screws in fan housing and
torque down to 5.5 Nm.
- Remove locking strip from
cylinder.
- Screw in spark plug and torque
down to 20 Nm.
Important! Check that the separa-
te connecting nut is securely loca-
ted on the screw thread of spark
plugs with separate nut and
tighten the nut if necessary.
- Reconnect spark plug terminal to
spark plug.
- Fit shroud.
1 1