2Reference Menu - Vacon 20 Complete User's Manual

control panel
7.4.2 Reference menu
Move to the reference menu with the UP / DOWN button (see Figure 7.2). The refer-
ence value can be changed with UP / DOWN button as shown in Figure 7.3.
If the value has big change, first press Left and Right buttons to select the digit which
has to be changed, then press Up button to increase and Down button to decreases
the value in the selected digit . The changing reference frequency will been taken
into use immediately without pressing OK.
Note! LEFT and RIGHT buttons can be used to change the direction in
Ref menu in local control mode.
RE ADY R UN S TOP
RE F
M O N
PA R
SYS
Hz
F WD REV I/O
OK
Press to enter
edit mode
Figure 7.3: Reference menu display
vacon
ALAR M FAULT
KEY PAD B US
Change
value
•
61
7