Read and follow the below instructions and precau-
tions for unpacking, installing, and servicing your
Remove all tape and packaging before using the
oven. Destroy the carton and plastic bags after
unpacking the oven. Never allow children to play
with packaging material.
Proper installation—Be sure your appliance is
properly installed and grounded by a qualified
technician in accordance with the National Elec-
trical Code ANSI/NFPA No. 70 latest edition and
local electrical code requirements. In Canada,
install in accordance with CSA Standard C22.1,
Canadian Electrical code, Part 1, and local elec-
trical code requirements. Install only per installa-
tion instructions provided in the literature
package for this oven.
User servicing—Do not repair or replace any part
of the appliance unless specifically recom-
mended in the manuals. All other servicing
should be done only by a qualified technician.
This reduces the risk of personal injury and
damage to the oven.
Ask your dealer to recommend a qualified techni-
cian and an authorized repair service. Know how
to disconnect the power to the oven at the circuit
breaker or fuse box in case of an emergency.
Never modify or alter the construction of an oven
by removing the leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other
part of the oven.
Remove the oven door from any unused oven if
it is to be stored or discarded.
Be sure to have an appropriate foam-type fire
extinguisher available, visible, and easily located
near the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Save these instructions for future use.
IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN
Never use your appliance for warming or heating
Use care when opening oven door, lower oven
door, or warmer drawer (some models). Stand to
the side of the oven when opening the door of a
hot oven. Let hot air or steam escape before you
remove or replace food in the oven.
Keep oven vent ducts unobstructed. Touching
surfaces in this area when the oven is on may
cause severe burns. Do not place plastic or heat-
sensitive items on or near the oven vent. These
items can melt or ignite.
Placement of oven racks - Always place oven
racks in desired location while oven is cool. If rack
must be moved while oven is hot, do not let
potholder contact hot heating element in oven. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot
heating elements in the oven. Remove all
bakeware before moving the rack.
Do not use a broiler pan without its insert. Broiler
pans and inserts allow dripping fat to drain away
from the high heat of the broiler. Do not cover the
broiler insert with aluminum foil; exposed fat and
grease could ignite.
Protective liners - Do not use aluminum foil or any
other materials to line oven bottoms, except as
suggested in the manual. Improper installation of
these liners may result in a risk of electric shock, or
Do not cook food on the oven bottom. Cook in
proper bakeware and always use the oven racks.