BEFORE YOU CALL
Solutions to Common Problems
Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided
with the problem listed:
Oven control panel beeps and
displays error codes
Poor baking results
Appliance is not level
Cannot move appliance easily
Appliance must be accessible for
Appliance does not operate
Flames inside oven or smoking
from oven vent
Oven does not operate.
Oven control has detected a fault or error condition. Press Clear Off to clear the
Press Bake or Broil function. If the F or E code error repeats, turn off power to
appliance, wait 5 minutes and then repower appliance. Set clock with correct time
of day. Try Bake or Broil function again. If fault recurs, press Clear Off to clear.
Many factors effect baking results. Use proper oven rack position. Center food in
the oven and space pans to allow air to circulate. Preheat oven to the set tempera-
ture before placing food in the oven.
Try adjusting the recipe's recommended temperature or baking time.
"Adjusting the Oven
Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
Kitchen cabinet alignment may make oven appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
If cabinets are not square or are built in too tightly, contact builder or installer to
make appliance accessible.
Cabinets not square or are built in too tightly. Contact builder or installer to make
Electrical power outage. Check house lights to be sure. Call your local electric
company for service outage information.
Service wiring is incomplete. Call 1-800-944-9044 for assistance.
Excessive spills in oven. Grease or food spilled onto oven bottom or oven cavity.
Wipe up excessive spills before starting oven. If flames or excessive smoke are
present when broiling, see
The time of day is not set. The oven clock must first be set in order to operate the
See "Setting the
Be sure oven controls are set properly.
and review instructions for the desired cooking function in this manual.
See "Oven Control Functions"
if you feel the oven is too hot or cold.