Printer Does Not Print - Lanier lp145n Hardware Manual

Printer Does Not Print

Possible Cause
Is the power on?
Does the Online indicator
stay on?
Does the Alert indicator
stay red?
Is paper loaded?
Can you print a configura-
tion page?
Is the interface cable con-
nected securely to the
printer and the computer?
Are you using the correct
interface cable?
Is the Data In indicator
blinking or lit after starting
the print job?
How is the signal strength
when using the wireless
LAN?
If printing still does not start, contact your sales or service representative. Con-
sult with the store where the printer was purchased for information about the
location of sales or service representatives.
Confirm that the cable is securely plugged into the power outlet
and the printer.
Turn on the power.
If not, press the {Online} key to light it.
If so, check the error message on the display and take the required
action.
Load paper into the paper tray or onto the bypass tray.
See p.71 "Loading Paper".
If you cannot print a configuration page, it probably indicates a
printer malfunction. Contact your sales or service representative.
See "Printing the Test Page", Quick Installation Guide.
Connect the interface cable securely. If it has a fastener, fasten it
securely as well.
The type of interface cable you should use depends on the compu-
ter you use. Be sure to use the correct one.
If the cable is damaged or worn, replace it with a new one.
See p.134 "Specifications".
If not blinking or lit, the data is not being sent to the printer.
❖ If the printer is connected to the computer using the in-
terface cable
Check the port connection setting is correct. For details about
checking the port connection, see p.102 "Checking the port
connection".
❖ Network Connection
Contact your network administrator.
❖ Ad hoc Mode or 802.11 Ad hoc Mode
Either move to a location where the signal is good, or remove
obstructions.
❖ Infrastructure Mode
Check the signal status from the "Maintenance" menu on the
control panel. If the signal is poor, either move to a location
where it is good, or remove obstructions.
Printer Does Not Print
Solutions
8
101