Lanier lp145n Hardware Manual page 117

Troubleshooting
Images are cut off, or excess
pages are printed.
The image of the printout is dif-
ferent from the image on the
computer's display.
Photo images are coarse.
Fine dot pattern does not print.
Black gradation is not natural.
Solid lines are printed as broken
lines.
The print out image is missing
or partially blurred.
8
The whole printout is blurred.
White streaks appear.
106
Status
If you are using paper smaller than the paper size selected in
the application, use the same size paper as that selected in the
application. If you cannot load paper of the correct size, use
the reduction function to reduce the image, and then print.
See the printer driver Help.
When [Toner saving] is checked under the [Print Quality] tab in
the printer driver's dialog box, the monochrome gradation
may appear differently.
See the printer driver Help.
Some applications lower the resolution for making prints.
Change the [Dithering:] setting in the printer driver's dialog
box.
See the printer driver Help.
Select [Gray reproduction (Text/Line Art):] in the printer driver's
dialog box.
See the printer driver Help.
Change the [Dithering:] setting in the printer driver's dialog
box.
See the printer driver Help.
• Paper is damp. Use paper that has been stored properly.
• Toner is almost depleted. When the "Add Toner" mes-
• Condensation may have collected. If rapid change in tem-
• Paper is damp. Use paper that has been stored properly.
• If you select [Toner saving] on the [Print Quality] tab in the
• Toner is almost depleted. When the "Toner depleted /
• Condensation may have collected. If rapid change in tem-
• Toner is almost depleted. When the "Toner depleted
Possible Causes, Descriptions, and Solutions
See p.63 "Paper and Other Media".
sage appears on the display panel, replace the toner car-
tridge.
See p.87 "Replacing the Toner Cartridge".
perature or humidity occurs, use this printer only after it
has acclimatized.
See p.63 "Paper and Other Media".
printer properties dialog box, printing is generally less
dense.
See the printer driver Help.
Add Toner" message appears on the display panel, re-
place the toner cartridge.
See p.87 "Replacing the Toner Cartridge".
perature or humidity occurs, use this printer only after it
has acclimatized.
/Add Toner" message appears on the display panel, re-
place the toner cartridge.
See p.87 "Replacing the Toner Cartridge".