Lanier lp145n Hardware Manual page 111

Troubleshooting
❖ Alert Messages (in alphabetical order)
Hardware Problem Wireless Board
Hardware Problem Wireless Card
Hardware Problem LCT
Hardware Problem Tray 1 (or greater number) There is a problem with the paper transfer mo-
Low Toner remaining
Remove Paper Standard Tray
Remove Paper Finisher Tray 1
Remove Paper Finisher Tray 2
8
100
Messages Descriptions and recommended actions
Accessing to the IEEE 802.11b board was pos-
sible, but an error has been detected. Check
that the board is installed properly.
IEEE 802.11b card access successful, but an er-
ror was detected. Check that the card is in-
stalled properly.
There is a problem with the paper transfer mo-
tor of Large Capacity Tray. Turn the main
switch off then on. If the problem does not
solve, contact your sales/service representa-
tives.
tor of paper tray 1 (or greater number). Turn
the main switch off then on. If the problem
does not solve, contact your sales/service rep-
resentatives.
The printer is almost out of toner. Prepare a
new toner cartridge.
The standard output tray is full. Remove the
paper from the standard output tray.
The finisher tray 1 is full. Remove paper from
the finisher tray 1.
The finisher tray 2 is full. Remove paper from
the finisher tray 2.