Connect The Switch To A Power Source - HP 1405-5 Installation And Getting Started Manual

Installing the Switch
Installation Procedures
N o t e
2-11

4. Connect the Switch to a Power Source

1. Plug the AC/DC adapter's power cord into the switch, and then plug the
AC/DC power adapter into a nearby AC power source.
The switches are shipped with one of two types of AC/DC power adapter;
either the universal AC/DC adapter with an AC power cord, or the wall plug-
in AC/DC adapter (without an AC power cord).
Connect the wall plug-in
AC/DC power adapter to the
switch and an AC power outlet
Connect the universal AC/DC
power adapter to the switch and
an AC power outlet
Figure 2-5. Connecting power to the switch
2. Re-check the LEDs during self test. See "LED Behavior" on page 2-8.