Diagnosing With The Leds; Led Patterns For General Switch Troubleshooting - HP 1405-5 Installation And Getting Started Manual

Diagnosing with the LEDs

Table 3-1 shows LED patterns on the switch that indicate problem conditions
for general switch operation troubleshooting.

LED patterns for General Switch Troubleshooting

1. Check in the table for the LED pattern you see on your switch.
2. Refer to the corresponding diagnostic tip on the next few pages.
Table 3-1. LED Error Indicators
LED Pattern Indicating Problems
Power
Off with power cord plugged in
On
1
This LED is not important for the diagnosis.
Port Link/Act LED
See Note 1
Off with cable connected
Troubleshooting
Diagnosing with the LEDs
Diagnostic Tips
➊
➋
3-3