Air Supply And Connections; Using The Power Management System - Craftsman 235.185930 Owner's Manual

Air Supply and Connections

Always use clean dry air. Dust,
corrosive fumes and/or excessive
moisture can ruin the motor of an
air tool. An air line filter can greatly
Main lines 3 times air tool inlet size.
To air system
To air tool
Lubricator
Branch line 2 times air
tool inlet size

USING THE POWER MANAGEMENT SYSTEM

WARNING:
Air wrenches are not torque con-
trol devices. Fasteners with specif-
ic torque requirements must be
MODEL 185930 POWER MANAGEMENT SYSTEM
Filter
Regulator
Drain regularly
Figure 1
Power setting indicators
Minimum
Figure 2
increase the life of an air tool. The
filter removes dust and moisture.
Be sure all hoses and fittings are
the correct size and are tightly se-
cured. See Figure 1 for a typical
piping arrangement.
Compressor
checked with suitable torque mea-
suring devices after installation
with an air wrench.
Maximum
Power management dial
6