Bios Setup; When To Use; How To Use - Getac v100 User Manual

BIOS Setup

When to Use

You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware .

You want to modify some specific settings to optimize the system

performance.

How to Use

Starting BIOS Setup



To run BIOS Setup Utility, press the F2 key when the prompt appears on the
screen during the system startup. The prompt shows up on the screen for
only a few seconds. You must press the F2 key quickly. The BIOS Setup Utility
main screen appears as shown next.
Downloaded from LpManual.com Manuals