Page 4
2,500 min and 5,500 min To saw aluminium, only use aluminium- This enables you to optimize the cutting speed cutting saw blades provided by Festool to suit the respective material (see table 1.3). (see Festool catalogue). Seen at Ideal Tools.
Page 5
have been approved for the maximum speed - Vacuum of approx. 5,000 Pa. of the machine (5,500 min Note: Festool extractors CTM 22 E - CTM 55 E have a diameter of 216 mm meet these requirements. can be used.
Therefore, hold the workpiece firmly and lower the saw unit very slowly. Accessories Refer to the Festool catalogue or the Internet Only saw one workpiece at a time. If under www.festool.com for the order numbers several workpieces sawn of accessories and tools.
Page 7
EN 61 029, Direction de recherce et développement EN 55 014, EN 61 000 direktiivien 73/23/EY, 98/37/EY, 89/336/EY määräysten mukaan. Festool GmbH Wertstr. 20 D-73240 Wendlingen EF-konformitetserklæring: Vi erklærer at have alene Dr. Johannes Steimel ansvaret for, at dette produkt er i overensstemmelse med de følgende normer eller normative dokumenter:...
Need help?
Do you have a question about the Symmetric SYM 70 E and is the answer not in the manual?
Questions and answers