Auto: When a HDMI1.4a 3D timing identification signal is detected, the 3D image
is selected automatically.
Choose "Off" to disable 3D function.
Choose "On" to enable 3D function.
If you see a discrete or overlapping image while wearing DLP 3D glasses, you may
need to execute "Invert" to get best match of left/right image sequence to get the
Use this feature to select the 3D format. Options are: "Frame Packing", "Side-by-Side
(Half)", "Top and Bottom", "Frame Sequential" and "Field Sequential".
Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @
24 frame packing.
Downloaded From projector-manual.com Acer Manuals
"Frame Sequential" is supported the DLP Link 3D input signals from VGA / HDMI connector.
"Frame Sequential" / "Field Sequential" are supported the HQFS 3D input signals from Composite/S-
video connector connector.
"Frame Packing" / "Side-by-Side(Half)" / "Top and Bottom" are supported from HDMI 1.4a 3D input