Image has vertical flickering bar
Use "Clock" to make an adjustment. Refer to the "Screen" section for more
Check and reconfigure the display mode of your graphic card to make it
compatible with the product.
Image is out of focus
Adjust the "Focus Ring" on the projector lens.
Make sure the projection screen is within the required distance. Refer to
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best
image in 16: 9 format on projector side.
If you play 4:3 format DVD title, please change the format as 4:3 in projector
If the image is still stretched, you will also need to setup the display format
as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
Move the projector closer to or further from the screen.
Press "Menu" on the remote control or on the control panel. Go to "Screen" -->
"Aspect Ratio"and try the different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the screen and
below the bottom of the screen.
Use "Screen" --> "V Keystone" from the OSD to make an adjustment.
Image is reversed
Select "Screen" --> "Ceiling Mount" from the OSD and adjust the projection
Downloaded From projector-manual.com Acer Manuals