Spot Out; Zoom - Samsung SRD-494 User Manual

SPOT OUT

The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
1. In Live mode, right-click any area on the screen.
The Live menu appears.
2. Click Spot Out.
The split screen appears according to the Spot Out source.
(Page 61)

Spot Out 1: It supports auto sequence and single mode by default,
and additionally supports 9-split and 4-split modes if selected
<Multi Spot> out.

Spot Out 2: It supports auto sequence and single mode.

ZOOM

This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge
it twice.
1. Select <Zoom In> in the right-click menu.
Press the [ZOOM] button on the front panel or the remote control, or simply click <
menu. The zoom box appears.
2. Use the direction keys, or drag and drop to specify an area to enlarge.
3. Press the [ENTER] button, or double-click the selected area to enlarge it twice.

In the enlarged image, use the direction buttons ( ◄ ►) on the remote control or the front panel to move the enlarged
area.
4. Press the [ZOOM] button on the front panel or the remote control to release the zoom.
2015-01-01 01:10:25
Scene Mode 
2015-01-01 01:10:25
Spot Out 1
Auto Sequence
Spot Out 2 
CH1
Audio Off CH2
CH3
Freeze
CH4
Stop Alarm
CH5
Record
CH6
Play
CH7
Search
CH8
Backup
Main Menu
Shutdown
Hide Launcher
Logout
> in the launcher
2015-01-01 01:10:25 2015-01-01 01:10:25
English _39