Spot Out - Samsung SRD-830 User Manual

Switching to Single Mode
When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its
Single mode.
Refer to "Remote Control > Using the numeric buttons". (Page 15)

Ex : If double-clicking CH 3 or pressing the number "3" on the remote control or the front panel.
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16

SPOT OUT

The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
1. In Live mode, right-click any area on the screen.
The Live menu appears.
2. Click Spot Out.
The split screen appears according to the Spot Out source.
(Page 55)

Spot Out 1 : Supports 16-, 9-, 4-split, Auto Sequence and Single
modes.

Spot Out 2, 3, 4 : Supports 4-split, Auto Sequence and Single
modes.

The number of Spot Out terminals differs according to the model.
For the Spot Out port of a model, refer to "Part Names and
Functions (Rear)". (Page 12)
CH3
Scene Mode 
CH1
2012-01-01 01:10:25
Spot Out  CH2
Spot Out 1 
16-split
CH3
ZOOM
Spot Out 2  9-split
CH4
Audio Off
Spot Out 3  4-split
CH5
Freeze
Spot Out 4  Auto Sequence
CH6
Stop Alarm
CH7
Single 
Record
CH8
Play
CH9
CH10
Search
CH11
Backup
CH12
Main Menu
CH13
Shutdown
CH14
Hide Launcher
CH15
Logout
CH16
2012-01-01
01:10:25
< Multichannel Live Menu >
English _35