Spot Out - Samsung SRD-842 User Manual

Switching to Single Mode
When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the remote control to switch to its Single mode.
Refer to "Remote Control > Using the numeric buttons". (Page 13)
` Ex : If double-clicking CH 3 or pressing the number "3" on the remote control.
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16

SPOT OUT

The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
1. In Live mode, right-click any area on the screen.
The Live menu appears.
2. Click Spot Out.
The split screen appears according to the Spot Out source.
(Page 55)
Spot Out : It supports auto sequence and single mode by default,
`
and additionally supports 16-split, 9-split and 4-split modes if
selected <Multi Spot> out.
;
CH3
Scene Mode 
2014-01-01 01:10:25
Spot Out
Auto Sequence
Audio Off
CH1
Freeze CH2
CH3
Stop Alarm
CH4
Record
CH5
Play
CH6
Search
CH7
Backup
CH8
Main Menu
CH9
Shutdown
CH10
Hide Launcher CH11
CH12
Logout
CH13
CH14
CH15
CH16
English _33