Samsung SRD-494 User Manual page 50

main menu
Settings
You can copy and import the DVR settings by using a storage media.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <System> window to
move to <System Management>, and press [ENTER]
button.
2. Select <Settings>.
A window of storage device and load factory default
appears.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and export or import settings data to a storage device.
• Storage Device : Shows the connected storage device.
• Export : All logs recorded in the DVR are exported to the
storage media.
• Import : Imports DVR settings from the storage device and applies to the DVR.

If <Include Network Settings> is checked, the network settings will be imported too.

After importing the configuration, please reboot DVR to take effect.
• Load Factory Default : If <Default> is selected, a
confirmation dialog for "Load Factory Default" prompts.
Press <OK> to initialize the system to the factory default.

DVR will restart after loading facotry default.
• Power Off : When power is off, Alarm 1 is activated. After
checking the checkbox, if you push the <Apply> button, all
event alarms that were set by Alarm 1 output will be
released. After this, it is impossible to select Alarm 1 by
other Alarm outputs.

If that function is set, all checkboxes in all alarm setup screens
and the Alarm 1 out checkbox are deactivated to Off.
4. To move to the previous menu, press <Previous>.
50_ main menu
System Management
Settings
System Information
Storage Device 0 MB (Remained Capacity)
Export
DVRUSB 38010100
USBDVR No data Import
Include Network Settings
Load Factory Default
Default
Power Off
No. 1 alarm output used when the power is off.
Previous
System Management
Settings
System Information
Storage Device 0 MB (Remained Capacity)
Load Factory Default
Export
DVRUSB 38010100
USBDVR No data Import
Sure to Default Setting?
Include Network Settings
Recording stops few second.
Load Factory Default OK Cancel
Default
Power Off
No. 1 alarm output used when the power is off.
Previous
Apply
Apply