Samsung SRD-494 User Manual page 95

Menu
PTZ
OSD Menu
Display Pane
Logout
User ID

M
Dual Stream selection : If you right-click a channel among the web viewer live screens, a dropdown menu, 'network
stream/record stream' is shown. The default setting is 'network stream'. In this setting, videos are displayed in
'network stream' resolution. If 'record stream' is selected, videos are displayed in 'record stream' resolution.
OSD Information Display
The channel number of the connected DVR are displayed.
Either the <DVR Time> or the <PC Time> will be displayed as the
current date and time, according to your configuration.
It displays whether the PTZ controls are active.
Shows Audio On/Off status.
Alarm icon appears when alarm is issued.
It disappears when pressed the [ALARM] button of the DVR.
Motion icon appears when a motion is detected.
Tampering icon appears when a tampering is detected.
Shows the recording status.

M
If you have set PTZ cameras for the DVR, "PTZ" is displayed on the
screen. Select a PTZ camera channel and use the [PTZ] button for
camera control.
Connected DVR
This displays the IP address and the status of the connecting
DVR.

M
Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of
users is exceeded.

The number of simultaneous connections are limited to 10.
Setting the Display of the OSD Time Information
Select <DVR Time> or <PC Time> for the OSD time
information display setting.
• DVR Time : Based on the time of the connected DVR
• PC Time : Based on the time of the PC currently running
the Web Viewer.
Controls connect PTZ camera(s).
Goes to the relevant menu screen of a camera, which supports OSD menu and changes
the menu.
Displays the video of camera connected to DVR.
Click Logout icon for logout.
Displays the user's ID.
Functions
English _95