Samsung SRD-494 User Manual page 16

overview
Using the Numeric buttons
1. Press any button among 1 to 8.
2. Move to the selected channel number.
Changing the Remote Control ID
Remote control's ID and DVR's ID should be matched for proper operation.
1. Press the [ID] button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the [ID] button of the remote control.
3. When ID input is done, press the [ID] button of the remote control again to check the setting.

M
If you want to change the remote control ID to 08: Press 0 and 8 in order while the [ID] button of the remote control is pressed.
For changing the ID of remote device, refer to "Remote Devices". (Page 58)
16_ overview