Samsung SRD-494 User Manual page 82

main menu
Recipient Setting
You can add/remove a recipient(s) to/from the specified group and edit the group if necessary.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <Mailing Service>, and press [ENTER] button.
2. Select <Recipient>.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Add : You can select a recipient name, e-mail address or
group.
You should have created a group in the <Group> menu
item before you can add a user to the group.

For inputting the recipient name and email address, refer to
"Using Virtual Keyboard". (Page 44)
4. When the recipient setup is done, press <OK>.
SNMP
You can configure the settings for the SNMP protocol.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <SNMP>, and press [ENTER] button.
The SNMP setup screen appears.
2. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Enable SNMP v1 : SNMP version 1 will be active.
• Enable SNMP v2 : SNMP version 2 will be active.
- Read Community : Read community where you can
access objects that support the SNMP protocols.
- Write Community : Write community where you can
access objects that support the SNMP protocols.
• Enable SNMP v3 : SNMP Ver.3 is used.
- Password : SNMP Ver.3 initial user password is set.
3. When the SNMP setup is done, press <OK>.
82_ main menu
Mailing Service
SMTP Event Group
Group All Group
Group Name e-Mail Address
OK Cancel
Mailing Service
SMTP Event Group
Group ABC
Add recipient
Group Name e-Mail Address
Name
Email
Select Group ABC
OK Cancel
OK Cancel
SNMP
Enable SNMP v1
Enable SNMP v2
Read Community public
Write Community write
Enable SNMP v3
Password
OK Cancel
Recipient
Add
Delete
Previous/Next Page
Recipient
Add
Delete
Previous/Next Page