Apply Alarm I/O; Apply Audio - LevelOne FCS-4041 User Manual

2.3

Apply Alarm I/O

The network Speed Dome Camera supports 4 digital alarm inputs and 2 digital
alarm outputs. Please make sure the alarm connections are properly wired
before starting to configure alarm related settings on this "Application" page.
Please refer to the pin definition table below for alarm system wiring.
Pin
ALARM_OUT_NO_1
1
ALARM_OUT_NC_1
2
ALARM_OUT_COM_1
3
GND
4
ALARM_OUT_NO_2
5
ALARM_OUT_NC_2
6
2.4

Apply Audio

Please refer to the illustrations below to set up the audio according to the Audio
pin definition.
Definition
Pin Definition
1 LINE_OUT
GND
2
LINE_IN
3
9
Pin Definition
ALARM_OUT_COM_2
7
GND
8
ALARM_IN_4
9
ALARM_IN_3
10
ALARM_IN_2
11
12 ALARM_IN_1