LevelOne FCS-4041 User Manual page 47

Tampering Alarm
Users are able to turn on/off Tampering Alarm function in Tampering Alarm
setting page. The default setting is Off.
Tampering Duration
Minimum Tampering Duration is the time for video analysis to determine
whether camera tampering has occurred. Minimum Duration could also be
interpreted as defining the Tampering threshold; longer duration represents
higher threshold. Settable Tampering Duration time range is from 10 to 3600
seconds.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when tampering is
detected. All options are listed as follows:

Enable Alarm Output 1/2
Check the items and select the predefined type of alarm output to
enable alarm relay outputs when tampering is detected.

Record stream to SD Card
Select this item and the Tampering Alarm recording will be stored in
Micro SD/ SDHC card when tampering is detected.
NOTE: Please make sure the local recording (with Micro SD/
SDHC card) is activated so that this function can be implemented.
Refer to

Send Alarm Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP
and/or E-Mail when tampering is detected.

Upload Image by FTP
Select this item and the Administrator can assign a FTP site and
configure various parameters. When tampering is detected, event
images will be uploaded to the appointed FTP site.
Recording for further details.
47