Camera- Default; Logout; Appendix A: Install Upnp Components - LevelOne FCS-4041 User Manual

7.4.11

Camera- Default

The Default Setting can be found under this path: PTZ> Camera- Default.
In the Camera Default page, users can set the camera back to factory default
settings simply by clicking on the <Set Default> button.

7.5 Logout

Click on the tab <Logout> on the top of the page, and the login window will pop
up. This enables login with another user name.

Appendix A: Install UPnP Components

Please follow the instructions below to install UPnP components.
Step 1: Go to <Start>, click on <Control Panel>, and then double click on <Add or Remove
Programs>.
Step 2: Click on <Add/Remove Windows Components> in the Add or Remove Programs
page.
Step 3: Select <Networking Services> from the Components list in Components Wizard
window of the Windows, and then click <Details>.
Step 4: Select <UPnP User Interface> in the Networking Services' subcomponents list and
then click on <OK>.
Step 5: Click on <Next> in the Windows Components Wizard page.
Step 6: Click on <Finish> to complete installation.
77