LevelOne FCS-4041 User Manual page 35

7.2.3.3 SNMP
The SNMP (Simple Network Management Protocol) setting can be found under
this path: System> Network> SNMP.
With Simple Network Management Protocol (SNMP) support, the IP Camera
can be monitored and managed remotely by the network management system.
SNMP v1/ v2
 Enable SNMP v1/ v2
 Read Community
 Write Community
Traps for SNMP v1/ v2
Traps are used by the IP Camera to send massages to a management system
for important events or status changes.
 Enable Traps
 Trap address
 Trap community
Select the version of SNMP to use by checking the box.
Specify the community name that has read-only access to all supported
SNMP objects. The default value is "public".
Specify the community name that has read/write access to all supported
SNMP objects (except read-only objects). The default value is "write".
Check the box to activate trap reporting.
Enter the IP address of the management server.
Enter the community to use when sending a trap message to the
management system.
35