LevelOne FCS-4041 User Manual page 36

Trap Option
 Warm Start
Click on <Save> button when complete.
7.2.3.4 UPnP
The UPnP setting can be found under this path: System> Network> UPnP.
UPnP Setting
 Enable UPnP
 Enable UPnP port forwarding
 Friendly name
A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera,
performs software reload.
When the UPnP is enabled, whenever the IP Camera is presented to the
LAN, the icon of the connected IP Cameras will appear in My Network
Places to allow for direct access.
NOTE: To enable this function, please make sure the UPnP
component is installed on your computer. Please refer to Install
UPnP components for UPnP component installation procedure.
When the UPnP port forwarding is enabled, the IP Camera is allowed to
open the web server port on the router automatically.
NOTE: To enable this function, please make sure that your
router supports UPnP and it is activated.
Set the name for the IP Camera for identity.
36