Table of Contents
Advertisement
2.2 Connect Ethernet Cable
Use of Category 5 Ethernet cable is recommended for network connection; to
have best transmission quality, cable length shall not exceed 100 meters. Connect
one end of the Ethernet cable to the RJ-45 connector of the Camera, and the
other end of the cable to the network switch or PC.
NOTE: In some cases, you may need use an Ethernet crossover cable when
connecting the IP Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs; if the LEDs are
unlit, please check LAN connection.
2.3 Connect Alarm I/O
The camera equips one alarm input and one relay output for alarm application.
Please refer to the label on the alarm terminal block and connect the alarm wiring
accordingly.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
11
Advertisement
Table of Contents
