LevelOne FCS-4041 User Manual page 49

This page shows the capacity information of the Micro SD card and a recording
list with all the recording files saved on the memory card. Users can also format
the SD card and implement automatic recording cleanup through the setting
page.
To implement Micro SD card recording, please go to the <Recording> page
(refer to the section Recording) for activation.
NOTE: Please format the Micro SD/SDHC card when using for the
first time. Formatting will also be required when a memory card
already being used on one camera and later transferred to another
camera with different software platform.
Device information
When users insert the Micro SD/SDHC card, the card information such as the
memory capacity and status will be shown at Device Information section.
When the memory card is successfully installed, the memory card status shall
be shown at <Device information> section in the Storage Management page.
Device setting
Click on the <Format> button to format the memory card.
Disk cleanup setting
Users can enable automatic recordings cleanup by specifying the time and
storage limits.
49