Using The Flatbed; Copy Screens And Options - Lexmark X850e User Manual

Using the flatbed

If you are using the flatbed to make copies:
1
Open the document cover.
2
Place the document face down on the flatbed.
3
Close the document cover.
4
Touch Copy on the home screen, or press Go on the numeric pad.
For Copy, continue with step 5.
For Go, continue with step 8.
5
Set the number of copies.
6
Change the copy options to meet your requirements.
7
Touch Copy It.
8
Touch Scan Next if you have more pages to scan, or touch Finish the Job if you are done.
Touching Finish the Job returns the MFP to the copy screen.
9
Touch Home when you are finished.

Copy screens and options

Copy From—Opens a screen where you can enter the size of the documents you are going to copy.
• Touching any of the paper size icons on the follow-on screen will make that your selection and return you to the
Copy Options Screen.
• When Original Size is set to Mixed Sizes, you can scan different size original documents. They will be scaled
automatically to fit the selected output media size.
Copy To—Opens a screen where you can enter the size and type of paper on which your copies will be printed.
• Touching any of the paper size icons on the follow-on screen will make that your selection and return you to the
Copy Options Screen.
• If the size settings for Copy From and Copy To are different, the MFP will automatically adjust the Scale setting to
accommodate the difference.
• If you have a special type or size of paper that you would like to copy onto that is not normally in the MFP paper
trays, you can select MP Feeder, and manually send the type of paper you want through the MP feeder.
• When using Auto Match, the MFP will match the size of the original document as specified in the Copy From box.
If a matching paper size is not loaded in one of the paper trays, the MFP will scale the copy to fit loaded media.
Scale—Creates an image from your copy that is proportionally scaled anywhere between 25% and 400%. Scale can also
be set for you automatically.
• When you want to copy from one size of paper to another, such as legal size to letter size, setting your Copy From
and Copy To paper sizes will automatically change the scale to keep all the original document information on your
copy.
• Touching the arrow to the left lowers the value by 1%; touching the arrow to the right increases the value by 1%.
• Holding your finger on an arrow makes a continuous increment.
• Holding your finger on an arrow for two seconds causes the pace of the change to accelerate.
Darkness—Adjusts how light or dark your copies will turn out in relation to the original document.
Downloaded From ManualsPrinter.com Manuals
Copying
Using the flatbed
25