Replacing The Access Panel - Lexmark X850e User Manual

Replacing the access panel

After you have installed options on the MFP system board, follow these steps to reattach the access panel.
1
Align the tabs on the right side of the access panel with the slots on the MFP.
2
Slide the panel to the right and towards the MFP.
3
Tighten the screws.
4
Plug the MFP power cord back into a properly grounded electrical outlet, and turn on the MFP.
Downloaded From ManualsPrinter.com Manuals
Installing options
Replacing the access panel
95