Table of Contents
Advertisement
5.
Press the SET button again. The display shows Sending data while data is being sent.
Do not use the organ while the display shows the text Sending Data.
6.
Press the MENU button to return to the main menu.
7.
Press the MENU button again to exit the Easy Menu.
Startup Settings
The Standard Intonation function saves the desired standard intonation in the memory.
1.
Push the MENU piston in.
2.
Use the - and + pistons to select the Startup Setting function.
3.
Push the SET piston in. The display shows the set intonation
4.
Use the - and + pistons to select an intonation (Romantic, Symphonic or Baroque) that
must be activated when the organ is switched on.
5.
Push the SET piston in. The selected intonation is stored in the memory. After this, the
Chorus ON/ OFF option appears on the display.
6.
Use the - and + pistons to select if the Chorus (CH) accessory is switched on or off
when the organ is switched on.
7.
Push the SET piston in. The selected setting is stored in the memory and you return
automatically to the main menu.
8.
Press the MENU piston in to exit the Easy Menu.
Reverb
Use the ROM, SYM, BAR, HIS buttons to activate the style and intonation the acoustics of which
must be changed.
1.
Press the MENU button.
2.
Use the - and + buttons to select the Reverb on the display.
3.
Press the SET button. The top line of the display will show the activated style and
intonation. The lines below indicate the selected acoustics.
4.
Use the - and + buttons to select the required reverberation.
5.
Press the SET button. The selected reverberation has now been saved in the memory
and you will automatically return to the main menu.
6.
Press the MENU button to exit the Easy Menu.
Key Volumes
If you are asked to enter a PIN code, the Key Volumes mode has been secured at
the request of the owner. Contact the owner or dealer to retrieve the PIN code. Enter
the code using the buttons of the capture memory and press the SET button.
The Key Volumes mode consists of the following submodes
Adjust
Reset one stop
Reset ALL stops
Adjust
:
The Adjust mode sets the volume per key, stop and intonation.
1.
Switch off all stops.
2.
Select an intonation.
3.
Press the MENU button.
4.
Use the - and + buttons to select the Key Volumes mode on the display.
5.
Press the SET button.
6.
Use the - and + buttons to select the Adjust mode on the display.
7.
Press the SET button.
JOHANNUS
the
Easy Menu
revolution
Easy Menu - 5 -
Advertisement
Table of Contents
