Key Volumes - Johannus LiVE 2T-A User Manual

5.5.5

Key Volumes

The Key Volumes function makes it possible to adjust the key volumes of each
stop. The Key Volumes function consists of the following sub-functions:
a. Adjust
b. Reset one stop
c. Reset ALL stops
a. Adjust
The Adjust function sets the volume per key and per stop.
1. Switch off all stops.
2. Press the MENU-piston.
Use the - and + pistons to select the Organ Settings function on the
3.
display.
4. Press the ENTER-piston. A list with available Organ Settings appears on the
display.
Use the - and + pistons to select the Key Volumes function on the
5.
display.
6. Press the ENTER-piston. The sub-functions of the Key Volumes menu appear
on the display.
If you are asked to enter a code, the Key
Volumes function has been secured at the
request of the owner. Contact the owner
or dealer to retrieve the code. Enter the code using the pistons of the
capture memory locations and press the ENTER piston.
Use the - and + pistons to select the sub-function Adjust and press the
7.
ENTER-piston. A question to select a stop to adjust appears on the display.
8. Activate one stop. A question to press a key appears on the display.
9. Press one key on the corresponding division and hold the key. The display will
now show following Key: the key indicator and following Vol: the
volume.
10. Use the - and + pistons to set the desired volume.
11. Press the ENTER-piston to save the change. The message Save changes?
appears on the display. Use the - and + pistons to select No or Yes.
12. Press the ENTER-piston to confirm.
13. If you have chosen No, you automatically return to the Adjust submenu. If
you have chosen Yes the message Programming Key Volume appears
on the display. After several seconds you will return to the Key Volume
menu.
14. Press the MENU piston three times to exit the Johannus Menu.
More key volumes can be changed by pressing another key or by selecting
another stop.
User Manual LiVE 2T-A / LiVE 3T-A (AGO)
Enter code:
_ _ _ _
35