Reverb; Key Volumes - Johannus Symphonica 35 User Manual

9. Use the - and + buttons to select the required tweeters volume. Press
the SET button.
10. All selected settings are saved in the memory and you automatically
return to the main menu.
11. Press the MENU button to exit the Easy Menu.
When exiting the Startup Settings (press the MENU button)
between times, all Startup Settings changed until that moment are
stored in the memory.
4.15.11

Reverb

1. Use the ROM, SYM, BAR, HIS (styles), SOLO and TRIO (intonation)
buttons to activate the style and intonation the acoustics of which must
be changed.
2. Press the MENU button.
3. Use the - and + buttons to select the Reverb mode on the display.
4. Press the SET button. The top line of the display will show the
activated style and intonation. The lines below indicate the selected
acoustics.
5. Use the - and + buttons to select the required reverberation.
6. Press the SET button. The selected reverberation has now been
saved in the memory and you will automatically return to the main
menu.
7. Press the MENU button to exit the Easy Menu.
4.15.12

Key Volumes

If you are asked to enter a PIN code, the Key Volumes mode has
been secured at the request of the owner. Contact the owner or
dealer to retrieve the PIN code. Enter the code using the buttons
of the capture memory and press the SET button.
The Key Volumes mode consists of the following submodes:

Adjust

Reset one stop

Reset ALL stops
Adjust:
The Adjust mode sets the volume per key, stop and intonation.
1. Switch off all stops.
2. Select an intonation.
3. Press the MENU button.
4. Use the - and + buttons to select the Key Volumes mode on the
display.
5. Press the SET button.
6. Use the - and + buttons to select the Adjust mode on the display.
7. Press the SET button.
8. Activate one stop.
9. Press one key on the corresponding division and hold the key. The
display will now show following Key: the key indicator and following
Vol: the volume.
10. Use the - and + buttons to set the required volume.
11. Press the SET button after having changed one or more keys.
27