Additional Required Tools And Adhesives - QuiQue's Aircraft YAK-54 Assembly Manual

Additional Required Tools and Adhesives

• Covering/Trim iron
• Xacto knife, #11 blade
• Pacer hinge glue (PT-55)
• 5, 15 and 30-minute epoxy
• Petroleum jelly/Lithium grease
• Acetone/Alcohol swabs
• Felt-tip marker
• Pencil and Marker
• Ruler
• Drill
• Drill bit 1/16",1/8", ¼", 3/16", #33, #25, #54
• Wire cutter
• Course and fine sandpaper
• Thin, medium and thick C/A
• Full threaded servo mounting screws
• Sullivan inner nyrod
• Pliers
• Masking tape
• Ultra fine point sharpie
• Electrical tape
• Double-sided tape
• Rat-tail file
• Pin vise
• Round toothpick
• Velcro
• Thread Locker
Extensions:
• (2) 24" and (2) 3" servo extensions for Ailerons
• (2) 48" servo extension for Elevators
• (1) 24" servo extension for throttle
• (2) 12" servo extension from Aileron matchbox to Receiver
6