Table of Contents
Advertisement
Figure 26
Step 4
Attach the double CF arm to your
servo arm and mark the holes you
want to use to couple the servo to
your second servo.
Step 5
Drill the holes and adjust your pull-
pull system with the first servo that
has the double CF arm.
Step 6
Attach the second servo to the first
servo by using provided ball links
and 1.5" titanium rods.
Step 7
Connect your matchbox and adjust
the travel of both servos according to
your matchbox instructions. Make
sure that servos are not fighting each
other through out their travel.
Figure 27
Step 8
After you fly the airplane for 3 to 5
flights you will need to readjust the
cables because they will get to "their
place". After that you should check
the cables every 50 flights or so.
25
Hide quick links:
Advertisement
Table of Contents
