Table of Contents
Advertisement
Figure 35
Figure 36
Figure 37
DA100 Engine Installation with
MTW Canisters
Header drop down should be 50mm
and canisters are MTW 75, front exit
that can be purchased from Desert
Aircraft.
Step 1
Remove the covering from the
bottom of the fuselage and leave
1/4" ultra-coat, so you can iron the
covering down nicely into the
opening.
Figure 38
Step 2
To avoid cutting the header, remove
the covering in front of the landing
gear and then remove the stringers.
This will not weaken the structure of
your plane.
Note that you can avoid this step by
cutting 1" or slightly more off of the
headers.
According to Desert Aircraft the
shortest that header can be is 9.5"
long.
28
Hide quick links:
Advertisement
Table of Contents
