Toro 41568 Operator's Manual page 23

Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
8 hours
50 hours
100 hours
200 hours
400 hours or yearly
1
More often when operating in high temperatures
2
More often in dusty, dirty conditions
3
More often when using wetable powers
Important Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Check the air filter, cap, and baffle for wear or damage.
Check the engine oil.
Check the tire pressure.
Check the engine coolant level
Check the hydraulic oil level
Clean the suction strainer
Initial break-in service only: check the fan and alternator belts, torque the
wheel lug nuts, replace the hydraulic oil filter, and change the rear planetary
gearbox fluid.
Check the battery electrolyte level.
Check the battery cable connections.
Lubricate all grease fittings.
Initial break-in service only: change the engine oil (includes synthetic oil) and
replace the engine oil filter.
Change the engine oil (includes synthetic oil).
Replace the engine oil filter.
Check the cooling system hoses for wear or damage.
2
Service the air cleaner.
Check the fan and alternator belts.
Inspect the condition and wear of the tires.
Torque the wheel lug nuts.
Check the front wheel toe-in.
Clean the radiator fins
Initial break-in service only: pack the front wheel bearings.
Change the spark plugs.
Change the hydraulic oil.
Replace the hydraulic oil filter.
Inspect the fuel lines.
Replace the fuel filters.
Change the rear planetary gearbox fluid.
Check the coolant (as directed by the manufacturer) and change if necessary.
Drain and clean the fuel tank.
Pack the front wheel bearings.
23
3
1,