Toro 41568 Operator's Manual page 19

Turf sprayer
Hide thumbs Also See for 41568:
Table of Contents

Advertisement

3. Release the parking brake.
4. Tow the sprayer at less than 3 mph (4.8 kph).
5. When finished, close the tow valve and torque it to no
more than 5 to 8 ft-lb (7 to 11 N m).
Sprayer Controls and
Components
Master Boom Switch
The master boom switch allows you to start or stop the
spray operation. Press the switch with your foot to enable
or disable the spray system (Fig. 19).
Figure 19
1. Master boom switch
Boom Switches
The boom switches are located at the front of the control
panel to the right of the seat (Fig. 20). Toggle each switch
forward to turn the corresponding boom section on and
rearward to turn each off. When the switch is turned on, a
light on the switch illuminates. These switches will only
affect the spray system when the master boom switch is on.
2
3
1
5
Figure 20
1. Boom switches
2. Pump switch
3. Application rate switch
4. Agitation switch
1
4
5. Empty plugs (picture
shows the optional boom
lift switches installed)
Pump Switch
The pump switch is located on the control panel to the right
of the seat (Fig. 20). Toggle this switch forward to run the
pump or rearward to stop the pump. When the switch is
turned on, a light on the switch illuminates.
Application Rate Switch
The application rate switch is located on the control panel
to the right of the seat (Fig. 20). Press and hold the switch
forward to increase the spray system pressure, or press and
hold it rearward to decrease pressure.
Agitation Switch
The agitation switch is located on the control panel to the
right of the seat (Fig. 20). Toggle this switch forward to
turn agitation in the tank on or rearward to stop the
agitation. When the switch is turned on, a light on the
switch illuminates. For agitation to work, the pump must be
on and the engine must be running above an idle. The
agitation valve is located behind the tank (Fig. 21).
Boom Lift, Sonic Boom, and Foam Marker
Switch Locations
If you install the electric boom lift, sonic boom, and foam
marker kit, you will add switches to the control panel for
controlling their operation. The sprayer comes with plastic
plugs in these locations.
Boom Valves
These valves turn the three booms on or off (Fig. 21). If
you ever need to manually turn off a boom, rotate the knob
on the valve clockwise to turn the valve off or
counterclockwise to turn it on.
1
1. Agitation valve
19
2
Figure 21
2. Boom valves

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multi-pro 5600

Table of Contents