Preparation ( 1 ) - KUKEN PTS-800ES Operation Manual

Preparation (1)
Check to make sure that all the components are present and that nothing is damaged in shipping.
If any problems, please contact your dealer.
Coupling Plug 20PM・・・・・・・・・・・・・・・・・・・・・ 1
●
Spiral Retainer Ring ・・・・・・・・・・・・・・・・・・・・ 1
●
AA Dry Cell Alkaline Battery ・・・・・・・・・・・・ 6
●
Insert batteries into PTS.
Unscrew and open the battery housing cover and
insert batteries.
Be sure to insert correct directions of batteries.
(If not using long, remove batteries)
Attach the reaction force absorber (option).
Make sure that the air supply is disconnected when attaching
the reaction force absorber.
Reaction force absorber (option)
Attach the reaction force absorber and then
attach the spiral retainer ring.
Warning
Operating PTS-800ES without a reaction force absorber may cause injuries.
Please do not operate PTS-800ES without a reaction force absorber.
Attaching Accessories
WARNING
Do not insert batteries opposite
directions. Inserting batteries
opposite directions will damage
the CPU.
Attach the coupling plug.
Make sure that the "O" ring is properly
attached to avoid the reaction force absorber
to be come off.
"O" Ring