Table of Contents
Advertisement
Main Unit Specifications (controller included)
Total Length
Weight
Free Rotation Speed
Air Consumption
Drive Size
Controller Specifications
Use Environment
Fastening Method
Parameters to be set
Resolution
Set Torque Range
Accuracy
Display
Numeric representation
Judgment Lamp
Controller
Pre Set Key
+ and - Key
SET Key
Power Key
Battery
Automatic Power Off
505 mm ( 19-7/8 in. )
9.35 kg ( 20.5 lbs. )
** Reactive force absorber, socket, and batteries not included.
125 rpm
3
0.56 m /min ( 19.9 c.f.m. )
1" SQ. DR.
Ambient temperature : 0 - 50 ℃ Humidity : 20 - 95 % ( non condensing )
Torque method
Set torque, fastening mode ( right hand screw/left hand screw )
1 Nm
400 - 800 Nm 1Nm/step
± 5%
0 - 999 3 digit LED with 7 segments
OK ( green ) : Lights when reaching to the set torque
NG ( red )
: Lights when fastening is interrupted. Warns insufficient torque.
Uses to select the pre-set torque.
Uses as +, SET, and/or - when changing the torque.
When the + key is pressed, 1Nm is added to the set torque. When - key is
pressed, 1Nm is subtracted from the set torque.
By keep on pressing the key, the numeric value can be fast-forwarded.
After changing the torque value, this key is to complete the setting.
Uses to manually startup for the set torque setting, etc.
AA dry cell x 6 alkaline ( recommended ), Oxyride, Ni-MH dry cell are applicable
Power is automatically turned off about 10 seconds after fastening or loosening
is operation is finished, or key operations are completed.
Displayed by x 1Nm
Advertisement
Table of Contents
