How to Fasten Wheel Nuts
Selecting the pre-set number ( for example, the pre-set number ① and 600Nm )
① Press the power switch. The display shows [ 0 ] blinking.
② Press ① for a few seconds. The pre-set ① is set 600 Nm.
When the display indicates ① [ P.1 ], release the key.
Soon after indicating [ P.1 ], the display also indicate
the torque value [ 600 ] Nm.
At this moment, the pre-set key ① is selected.
Selected pre-set number is valid until changing to other pre-set number.
③ Check the rotative direction ( Reverse Lever ).
L : Left Rotation
(Fastening the left
handed screw)
Automotive Mode [ Aut ] mode
Reverse
How to operate the lock lever (example)
Turn the handle to the direction
of A while pressing the lock
lever. Then release the lock
lever and turn the handle to
the direction B.
The reactive force absorber
rotates to the direction C.
How to insert the socket with the
throttle button ( slow start )
Pressing the throttle button
gently to rotate the spindle.
It is easier to insert the
socket when the spindle slowly
rotates.
Blinking
R : Right Rotation
(Fastening the
left handed screw)
Lock Lever
Handle
Press gently