Table of Contents
Advertisement
Unique Functions
Additional Functions
① PRE-SET FUNCTIONS
4 different torques can be set and stored ( Pre-set torques ).
In case of pre-tightening and final-tightening works, the tool can be used for various works.
② AUTO - START and AUTO - POWER OFF
By pressing the throttle lever, the CPU activates automatically.
If not operating for a certain period of time, the power will be turned off automatically.
③ REAL TIME DISPLAY
The torque can be shown on the panel in real time and easy to understand the situation.
④ LOOSENING FUNCTION
AUTOMOTIVE MODE [Aut] and INDUSTRIAL MODE [Ind] can be selected for loosening operations.
⑤ JUDGMENT LAMP
The fastening result can be judged if the operation is successful or not.
If the operation is successfully completed, the judgment lamp turns green.
If the operation is suspended or stopped, the NG lamp turns and alerts its under-torque.
⑥ AUTO SHUT OFF
The solenoid valve shuts off and stops the machine when the operation is completed successfully
and the judgment lamp turns green.
Safety Functions
① Fail Safe Function
In case batteries are exhausted or very low, the CPU will not be activated but the spindle turns
very slowly to reverse direction.
Operators can easily recognize the battery problem.
② Error Detection Function, Abnormal Fastening Detection [ CH1 ]
This function detects bolt stretching beforehand and forces to stop the machine.
This function can be turned on/off depending on works.
③ Function to Prevent Operational Error
This function is to prevent an operational error. The key which is set [ - - - ] and selected by
mistake will never be operated.
Other Functions
① Power Source
CPU is operated by batteries.
Use 6 of AA dry cell batteries. Alkaline (recommended) and also Ni-MH is available.
② Data Transmission ( Option )
PTS can be connected to a computer or the printer ( option ) with the KUKEN original
transmission cable ( option ) to transfer results.
PTS must be the transmission model ( option ) in order to transfer data.
Advertisement
Table of Contents
