Clean The Contact Pins And The Charging Strips; Battery Life; Winter Hibernation - Worx WG794E Instruction Manual

Landroid lawn mowing robot
Table of Contents

Advertisement

Available languages
  • EN

Available languages

C. Clean the contact pins and the charging strips
Clean the Contact Pins (3) located on the Charging Base (4) and the Charging Strip (5 )located on the Landroid
cloth. Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure
®
the Landroid
M successfully charges each time.

5.3 battery life

®
The heart of the Landroid
M is its 28-volt lithium-ion battery. No
maintenance is required. For proper storage of the battery, make sure
it is fully charged in kept in a cool dry place between (20°C-60°C).
The life-span of the Landroid
such as:
The time span of the mowing season in your region
Amount of hours the Landroid
Battery maintenance during storage
®
Landroid
M can be charged manually without the boundary wire.
(See Fig. N)
To manually charge the battery without connecting the
boundary wire to the charging base;
1. Connect the Charging base to a suitable power
supply.
2. Manually dock the Landroid
3. The charging base red light will turn on.
4. Within 3 seconds and before the charging base light turns green, press the Landroid
OFF button.
®
5. Landroid
M will begin to charge.

5.4 Winter hibernation

®
Your Landroid
M will live longer and healthier if it is allowed to hibernate. So even though it is tough, we would recommend
that you store your Landroid
Before you prepare your Landroid
Thoroughly clean your Landroid
Fully charge the battery.
Turn the power off.
To maximize the battery's life, it is recommended to fully charge the battery before storage during winter.
The Boundary Wire can be left in the ground although its ends should be protected, such as placed in a tin can with grease.
If the Charging Base is left outside for winter, leave the Boundary Wire connected.
NOTE: Before storing for winter, you can take your Landroid
functions will be tested and worn parts will be replaced.
When bringing the Landroid
are clean, it is recommended to use a fine grade emery cloth to clean. Then make sure the date and time are correct and
®
send the Landroid
M back to what it loves doing: mowing.
Lawn Mowing Robot
®
M's battery depends on various factors,
®
M mows per day
®
M into the Charging base while the Landroid
®
M in your shed or garage during the winter.
®
M for winter hibernation, we recommend you:
®
M.
®
M back to work after winter hibernation, make sure the Charging Strips (5) and Contact Pins (3)
1
N
®
M to a dealer for a thorough cleaning and tune-up, where its
®
M using a
®
M is powered off.
®
M power ON/
EN
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents