Boundary Wire Basics; Pegging The Boundary Wire; Burying The Boundary Wire - Worx WG794E Instruction Manual

F G
4.

boundary Wire basics

4.1 Pegging the boundary Wire

Use the Boundary Wire Distance Gauge (24) to set the correct
distance from the border of your lawn (More than 35cm*).
* This is the recommended distance. Use the provided distance
gauge to ensure proper installation.
®
If your neighbor also uses a Landroid M, then you
must keep a spacing of at least 2 metres between your
boundary Wire and your neighbors.
®
Please be aware that your Landroid M will not be able
to receive a signal from the boundary Wire beyond the
distance of 18m.
H
The boundary wire must outline the intended mowing area exactly.
12
®
Your Landroid M will become confused by extra bends or coils of Boundary Wire that are not part of its mowing area ( See
Fig. H). If there is excess Boundary Wire after the mowing area has been outlined, then cut it off and store this additional wire
in a separate location. However, it is important to leave the necessary length where it connects to the Charging Base so it can
be connected and still remain buried.

4.2 burying the boundary Wire

We recommend that you bury your boundary wire a few centimeters underground. This will ensure trouble-free operation
year after year, season after season. For burying the Boundary Wire you may purchase the optional WORX Territorial Marker
®
Tool accessory at the same store that sold you your Landroid M.
If you are planning to bury the Boundary Wire then it should be noted that when entering its Charging Base for the first
®
time, your Landroid M may find problems with the way you have laid the wire. It is recommended to first peg down the
®
Boundary Wire to the lawn so it is easy to make adjustments if necessary. This will allow the Landroid M to become
adjusted to its new environment and ensures it will successfully work with the charging base before the Boundary Wire is
buried.
®
When you have completed installing the boundary wire, it is recommended that you ask Landroid M to follow the
boundary wire by pressing the home button.
®
Whilst observing Landroid M locating the charging station you can then make alterations to the boundary wire route to
®
ensure trouble free tracking of the boundary wire by Landroid M when locating the charging station.
Lawn Mowing Robot EN