Keep It Clean; Cleaning The Body; Cleaning The Underside; Clean The Contact Pins And The Charging Strips - Worx Landroid WR101SI Instruction Manual

2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver (See Fig. M)
4. Firmly screw on the new Blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the Blade to the Blade Disc, make sure the Blade is able to spin freely.

9.2 Keep it clean

WARNING: Before cleaning turn your Landroid
OFF. Put on protective gloves before cleaning the
Blade Turning Disc (13) and do not use running water.
A. Cleaning the body
®
Your Landroid will live a much happier and longer life if it is
cleaned regularly. Although, as your Landroid
machine, you will need to take care when cleaning, so DO NOT
use a hose, high pressure washers or otherwise pour
running water on your Landroid
bottle filled with water. When cleaning the machine body use a soft
brush or clean cloth and avoid using solvents or polishes (See Fig.
N). Lastly, make sure that you remove all build up of grass clippings
and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
protective gloves before touching the Blade Turning Disc (13).
®
First, flip your Landroid upside down to expose its underside. Here you will see the Blade Disc, the chassis, and the
Front Wheel (11) and Driving Wheel (10). Clean everything thoroughly with a soft brush or moist rag.
WARNING: NEVER clean the underside of Landroid
Fig. O1, O2)
Rotate the Blade Disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any
obstructions.
O1
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the
tiniest crack can decrease your Landroid
C. Clean the contact pins and the charging strips
Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strips (4) located on the Landroid
cloth. Remove any build up of grass clippings and debris around the Contact Pins and charge strips periodically to ensure
®
the Landroid successfully charges each time.

9.3 Battery life

®
The heart of the Landroid is its 20-volt lithium-ion battery. No maintenance is required. For proper storage of the battery,
make sure it is fully charged in kept in a cool dry place between (20°C - 60°C).
The life-span of the Landroid
• The time span of the mowing season in your region
• Amount of hours the Landroid
Lawn Mowing Robot
®
is an electric
®
, it is best to use a spray
®
OFF and wear
®
's mowing output.
®
's battery depends on various factors, such as:
®
mows per day
®
N
®
with water flushing. Component damage can occur. (See
O2
15
®
using a
EN