Replace The Blades; Keep It Clean; Cleaning The Body; Cleaning The Underside - Worx WG794E Instruction Manual

b. Replace the blades
after some time, usually every season, your Landroid
will need to be replaced. Your Landroid
while using Blades of different age and quality. So when replacing
the Blades, make sure to replace all of them at the same time.
You can replace them with one of the three spare Blade kits and
extra Blade screws supplied with your Landroid
Before attempting to replace your Landroid
power off and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
2. Take the screws off the Blades with a screwdriver
3. Firmly screw on the new Blades (See Fig. K)
IMPORTaNT: after screwing the blade to the blade
Disc, make sure the blade is able to spin freely.

5.2 Keep it clean

WaRNING: before cleaning turn your Landroid
protective gloves before cleaning the blade Turning Disc (13) and do not use running water.
(See Fig. L,M)
a. Cleaning the body
®
Your Landroid M will live a much happier and longer life if it is cleaned regularly. although, as your Landroid
electric machine, you will need to take care when cleaning, so DO NOT use a hose, high pressure washers or otherwise
pour running water on your Landroid
use a soft brush or clean cloth and avoid using solvents or polishes (See Fig. L) .Lastly, make sure that you remove all
build up of grass clippings and debris.
b. Cleaning the Underside
again, it is important that you power the Landroid
14
before touching the blade Turning Disc (13).
First, flip your Landroid
Here you will see the Blade Disc (a), the chassis (b), and the Front (15)
and Driving (10) Wheels. Clean everything thoroughly with a soft
brush or moist rag.(See Fig. M)
Rotate the Blade Disc to make sure it moves freely and that there
is not anything lodged between it and the surrounding Motor Frame
Box. also, make sure the Blades are able to spin freely and that
there's no grass obstructing them.
IMPORTaNT: Remove any lodged debris so that it does not cause
a crack in the Blade Disc. Even the tiniest crack can decrease your
®
Landroid M's mowing output.
L
Lawn Mowing Robot
®
M does not like mowing
®
M.
®
M's Blades, turn the
®
M over.
®
M, it is best to use a spray bottle filled with water. When cleaning the machine body
®
®
M upside down to expose its underside.
®
M's Blades
K
®
M OFF by pressing the ON/OFF button. Put on
M OFF using the ON/Off Button and wear protective gloves
(a)
M
®
M is an
(b)
EN