RECIPROCATING SAW GENERAL SAFETY INSTRUCTIONS Warning! When using electric tools, basic safety pre- EXPLODED VIEW TECHNICAL SPECIFICATIONS cautions should always be followed to reduce the risk of fire, electric shock and personal injury, inclu- ding the following. Read all these instructions before Voltage | 230 V~ attempting to operate this product.
SPARE PARTS LIST PRS-600 15.Remove adjusting keys and wrenches. SAFETY INSTRUCTIONS Form the habit of checking to see that keys and adjus- ting wrenches are removed from tool before turning The following pictograms are used in these instructions POWERCRAFT NR...
OPERATION Fig.C Fig.B (RE)PLACING THE BLADE Make sure the saw blade is not resting upon objects or can come into contact with these, when the machine is switched on. Make sure the plug is not in the socket outlet. • Release the blade clamping screw using the 3 mm Switching on socket head wrench.
Page 5
ADJUSTING THE BASEPLATE ANGLE INLAY SAWS Fig.D Fig.E • To let the baseplate follow properly and rest on the • Inlay saws are only allowed in soft materials like workpiece with certainty, you can adjust the basepla- wood, cellular concrete, plasterboard, etc. te’s angle according to enclosed drawing.
MALFUNCTIONS ı ( UK ) DECLARATION OF CONFORMITY In case the machine does not function properly, there are a number of possible causes and corresponding solutions as described below. We declare under our sole responsibility that this product is in conformity with the following 1.