Oki C130n User Manual page 45

Note All factory default values are shown in bold.
ETHERNET
(cont.)
USB
Downloaded From ManualsPrinter.com Manuals
IPX/SPX FRAME TYPE Settings
ETHERNE Settings
T SPEED
Specify the transmission speed for the network and the transmission
method for bi-directional transmission.
DISABLE Settings
802.1X
If YES is selected, IEEE802.1x function is enabled.
If NO is selected, IEEE802.1x function is disabled.
PS Settings
PROTOCOL
Select whether PostScript jobs are received in the binary format or
the quoted format.
ENABLE Settings
If YES is selected, USB is enabled.
If NO is selected, USB is disabled.
JOB Settings
TIMEOUT
Specify the length of time (in seconds) until the print job being
received is timed out when USB is being used.
45 - C130n User's Guide
Interface Menu
AUTO, 802.2, 802.3, ETHER II,
SNAP
Specify the protocol used with NetWare.
AUTO, 100 FULL DUPLEX, 100 HALF DUPLEX, 10
FULL DUPLEX, 10 HALF DUPLEX
YES, NO
BINARY, QUOTED BINARY
YES, NO
60
0- -999